Sing Me To Steep

thick-walled mug with strappy handle attached on the inside

This piece is available for sale

$80

I am currently setting up e-commerce and shipping stuff, but I do not have everything figured out... if you want to buy this, please just send me an email at altpottery@gmail.com and we'll make arrangements

Materials

• PSH Wax Resist Emulsion UWAX2
  A brushable, water-wax emulsion applied to bisque pots to resist glaze. The wax burns away during firing, so none is present in the finished piece.
• PSH cone 6 clay Black C540i
  Pigmented with non-toxic iron oxide. Fires to a deep brown/black, deeper black when sealed with a transparent glaze. Not recommended for microwave heating because of its iron oxide content.
• PSH Transparent Glaze GTR62
  Non-toxic (lead free) glossy transparent finish, creates a food-safe surface for the interior of mugs and bowls, adds a gloss and brings out the hue of the clay body when used as a sealant.
• PSH Black Matte Glaze GBKM2
  Non-toxic (lead free) matte black, suitable for the exterior of pots. Rigid and durable, but vulnerable to scratches, gives a dark matte surface that resembles cast iron. A slow-drying glaze for brushing and detailed decoration.
• Piercing Jewelry: 10g CBR 6x16
  Stainless steel captive bead ring, 10g, 6mm bead x 16mm diameter. Absolutely not suitable for microwave heating.

Stages

• thrown: 2025-09-21 (waxing crescent)
  Humid morning, threatening thunderstorms. I could only stay at the studio for a couple of hours, and I threw four new pieces.
• trimmed: 2025-09-23 (waxing crescent)
  Back on the wheel to scrape off excess thickness and carve out a foot.
• decorated: 2025-09-23 (waxing crescent)
  Created a handle from clay rolled to 7mm thick and sliced into a strip. Attached with faux screws, and pierced with a hole in the handle. Finally, scratched in the maker's mark and the number 10 on the bottom.
• smoothed: 2025-09-29 (waxing gibbous)
  Lightly rubbed to smooth out surface irregularities
• bisque fired: 2025-10-10 (last quarter)
  Heated to approx 1000°C, producing chemical changes in the clay so that it is less brittle, water-resistant, water-absorbant, and can accept a glaze coating.
• sanded: 2025-10-15 (waning crescent)
  A fine grit sanding of the bisque-fired piece to ensure the surfaces are smooth before applying glaze.
• glazed: 2025-10-28 (waxing gibbous)
  Foot is sealed with wax, then the piece was brushed with glaze.
• glaze fired: 2025-11-29 (waxing gibbous)
  Heated to cone 6, further fusing the clay body molecules and melting the surface coating.
• finished: 2025-12-05 (waning gibbous)
  Added the piercing jewelry